Hi, I found that the transmission speed of tinc seems very disappointing, even in some cases, even the normal network communication has problems..
Feed Search
Jun 20 2021
Jun 20 2021
Jun 19 2021
Jun 19 2021
c-po closed T3632: policy: route-map: unable to configure route-target / site-of-origin as Resolved.
c-po moved T3632: policy: route-map: unable to configure route-target / site-of-origin from In Progress to Finished on the VyOS 1.2 Crux (VyOS 1.2.8) board.
c-po moved T3632: policy: route-map: unable to configure route-target / site-of-origin from In Progress to Finished on the VyOS 1.3 Equuleus board.
c-po moved T3633: Add LRO offload for interface ethernet from Backport Candidates to Finished on the VyOS 1.4 Sagitta board.
c-po moved T3633: Add LRO offload for interface ethernet from Need Triage to Finished on the VyOS 1.3 Equuleus board.
Jun 18 2021
Jun 18 2021
erkin removed a project from T3378: commit-archive source-address broken for IPv6 addresses: VyOS 1.4 Sagitta.
jestabro added a comment to T2768: Define a high level HTTP API.
A simple experiment using GraphQL to configure a DHCP server is here:
https://github.com/vyos/vyos-1x/compare/current...jestabro:graphql
Viacheslav moved T3633: Add LRO offload for interface ethernet from Open to Backport Candidates on the VyOS 1.4 Sagitta board.
Works fine VyOS 1.4-rolling-202106180929
vyos@r1-roll# set interfaces ethernet eth1 offload lro [edit] vyos@r1-roll# commit [edit] vyos@r1-roll# sudo ethtool -k eth1 | match large-receive-offload large-receive-offload: on [edit] vyos@r1-roll#
Jun 17 2021
Jun 17 2021
Cheeze_It added a comment to T3634: Add op command option for ping for do not fragment bit to be set.
Added PR:
Cheeze_It edited a custom field on T3634: Add op command option for ping for do not fragment bit to be set.
Viacheslav added a comment to T3633: Add LRO offload for interface ethernet.
Viacheslav renamed T3633: Add LRO offload for interface ethernet from Add LRO offload to Add LRO offload for interface ethernet.
c-po moved T3632: policy: route-map: unable to configure route-target / site-of-origin from In Progress to Finished on the VyOS 1.4 Sagitta board.
c-po closed T3624: BGP: add support for extended community bandwidth definition, a subtask of T2425: Rewrite all policy zebra filters to XML/Python style, as Resolved.
c-po changed the status of T3632: policy: route-map: unable to configure route-target / site-of-origin from Open to In progress.
c-po moved T3632: policy: route-map: unable to configure route-target / site-of-origin from Open to In Progress on the VyOS 1.4 Sagitta board.
c-po moved T3632: policy: route-map: unable to configure route-target / site-of-origin from Need Triage to In Progress on the VyOS 1.3 Equuleus board.
c-po moved T3632: policy: route-map: unable to configure route-target / site-of-origin from Needs Triage to In Progress on the VyOS 1.2 Crux (VyOS 1.2.8) board.
c-po added a comment to T3632: policy: route-map: unable to configure route-target / site-of-origin.
PR's for both crux and equuleus
trystan added a comment to T3362: 1.3 - RC1 ifb redirect failing to commit.
The same config now commits however the fq-codel shaper that was functional in 1.2.7 that's applied to it does not activate in 1.3.0-rc4
srnoth added a comment to T3619: Performance Degradation 1.2 --> 1.3 | High ksoftirqd CPU usage.
@Viacheslav per your suggest in the discussion thread I ran the following:
srnoth added a comment to T3619: Performance Degradation 1.2 --> 1.3 | High ksoftirqd CPU usage.
@c-po for simplicity I created a barebones vyos VM to route between two subnets.
Jun 16 2021
Jun 16 2021
c-po changed the status of T3631: route-map: migrate "set extcommunity-rt" and "set extcommunity-soo" to "set extcommunity rt|soo" to match FRR syntax from Open to In progress.
c-po changed the status of T3631: route-map: migrate "set extcommunity-rt" and "set extcommunity-soo" to "set extcommunity rt|soo" to match FRR syntax, a subtask of T2425: Rewrite all policy zebra filters to XML/Python style, from Open to In progress.
c-po moved T3630: op-mode: add "show version kernel" command from Open to Finished on the VyOS 1.4 Sagitta board.
c-po moved T3630: op-mode: add "show version kernel" command from Need Triage to Finished on the VyOS 1.3 Equuleus board.
SrividyaA added a comment to T3582: 'delete log file' does not work.
Submitted this PR: https://github.com/vyos/vyatta-op/pull/46
c-po renamed T3318: Update Linux Kernel to v5.4.208 / 5.10.142 from Update Linux Kernel to v5.4.125 / 5.10.43 to Update Linux Kernel to v5.4.126 / 5.10.44.
c-po updated the task description for T3318: Update Linux Kernel to v5.4.208 / 5.10.142.
SrividyaA reopened T3582: 'delete log file' does not work as "Open".
SrividyaA closed T3623: Fix for dummy interface option in the operational command "clear interfaces dummy" as Resolved.
the possible completion output is fixed in the latest release: 1.4-rolling-202106151212
Unknown Object (User) changed the status of T3629: IPoE server shifting address in the range from Open to In progress.
Unknown Object (User) created T3629: IPoE server shifting address in the range.
Jun 15 2021
Jun 15 2021
n.fort added a comment to T3610: DHCP-Server creation for not primary IP address fails.
At least on simple tests, this modification seems to work.
I have tested on version 1.3, first configuring dhcp server for both addresses: for the one that was defined first, and one for the las IP address defined (of course, one instance of dhcp-server running at a time).
If this needs more testes, let me know what I can do for you.
jjakob added a comment to T3214: OpenVPN IPv6 fixes.
Can you try any 1.3 rolling version before 2020-10-30 commit c8b7e5c ?
shaferstockton added a comment to T3214: OpenVPN IPv6 fixes.
Uploaded the config as generated.
Viacheslav added a comment to T3619: Performance Degradation 1.2 --> 1.3 | High ksoftirqd CPU usage.
Flame graph for 1.3-rc4, proxmox/virtio
leacho added a comment to T1838: Flow accounting for ppp interfaces not work.
Hi @c-po - do you mean in the context of 'set system flow-accounting interface ppp*'? - unfortunately I have tried this and I'm still not getting anything out.
c-po added a comment to T1838: Flow accounting for ppp interfaces not work.
Well you could try to use ppp* as globbing pattern - maybe this works?
Jun 14 2021
Jun 14 2021
c-po added a comment to T3623: Fix for dummy interface option in the operational command "clear interfaces dummy".
The question is if this is really relevant - as to my knowledge it is not possible to clear those counters unless unloading and reloading the interface driver(s)
leacho added a comment to T1838: Flow accounting for ppp interfaces not work.
Hi - is there any update on a fix for this bug?
Jun 13 2021
Jun 13 2021
c-po changed the status of T3017: bridge will lose the tuntap member after reboots from Open to On hold.
c-po closed T3622: WWAN: add support for APN authentication, a subtask of T3620: Rename WWAN interface from wirelessmodem to wwan to use QMI interface, as Resolved.
c-po moved T3621: PPPoE interface does not validate if password is supplied when username is set from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T3622: WWAN: add support for APN authentication from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T3621: PPPoE interface does not validate if password is supplied when username is set from Open to Finished on the VyOS 1.4 Sagitta board.
c-po moved T3622: WWAN: add support for APN authentication from Open to Finished on the VyOS 1.4 Sagitta board.
c-po changed the status of T3622: WWAN: add support for APN authentication, a subtask of T3620: Rename WWAN interface from wirelessmodem to wwan to use QMI interface, from Open to In progress.
c-po changed the status of T3622: WWAN: add support for APN authentication from Open to In progress.
c-po triaged T3621: PPPoE interface does not validate if password is supplied when username is set as Low priority.
c-po changed the status of T3621: PPPoE interface does not validate if password is supplied when username is set from Open to In progress.
c-po moved T3577: Generating vpn x509 key pair fails with command not found from Open to Backlog on the VyOS 1.4 Sagitta board.
c-po moved T3217: Save FRR configuration on each commit from Open to In Progress on the VyOS 1.4 Sagitta board.
c-po moved T3582: 'delete log file' does not work from Open to Finished on the VyOS 1.4 Sagitta board.
c-po moved T2947: Nat translation many-many with prefix does not map 1-1. from Open to Backport Candidates on the VyOS 1.4 Sagitta board.
c-po moved T1866: Commit archive over SFTP doesn't work with non-standard ports from Open to Finished on the VyOS 1.4 Sagitta board.
c-po moved T2669: DHCP-server overlapping ranges. from Open to Finished on the VyOS 1.4 Sagitta board.
c-po moved T3461: OpenConnect Server redundancy check from Open to Finished on the VyOS 1.4 Sagitta board.
c-po moved T2645: Editing route-map action requires adding a new rule from Open to Finished on the VyOS 1.4 Sagitta board.
c-po moved T1944: FRR: Invalid route in BGP causes update storm, memory leak, and failure of Zebra from Open to Finished on the VyOS 1.4 Sagitta board.
c-po moved T3358: VRRP: Is it necessary to support switches between master and backup with script? from Open to Finished on the VyOS 1.4 Sagitta board.
c-po moved T3455: system users can not be added in "edit" from Backport Candidates to Finished on the VyOS 1.4 Sagitta board.
c-po moved T3620: Rename WWAN interface from wirelessmodem to wwan to use QMI interface from In Progress to Finished on the VyOS 1.4 Sagitta board.
c-po added a comment to T3619: Performance Degradation 1.2 --> 1.3 | High ksoftirqd CPU usage.
can you tell us a bot more of your configuration? Like is PPPoE used?
c-po moved T3135: BFD configurations fail to be applied from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T3358: VRRP: Is it necessary to support switches between master and backup with script? from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T3602: Renaming BGP Peer Groups Leaves Router Broken from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T3609: BGP Peer Group Changes Slow from Need Triage to Finished on the VyOS 1.3 Equuleus board.
c-po moved T3619: Performance Degradation 1.2 --> 1.3 | High ksoftirqd CPU usage from Need Triage to In Progress on the VyOS 1.3 Equuleus board.
c-po moved T3620: Rename WWAN interface from wirelessmodem to wwan to use QMI interface from Need Triage to Finished on the VyOS 1.3 Equuleus board.